Welcome, Guest
Username: Password: Remember me

TOPIC:

1957 Ranger IV, Evinrude 30hp Lark 28 Sep 2021 15:32 #114888

May only need the impeller? Inspect it first, housing and plate may be OK. Keyway, screws? Water tube grommet is available.
Other impeller #s 375808 378891 775521
Sierra does not have kits for this application. 
A lot on Ebay.
Mike
1950 Skipper on Holsclaw Boat Roadster trailer
1954 Skipper w/ ’54 Johnson 10hp
1954 Deluxe Runabout w/ ’54 Johnson 25hp
1954 Vagabond w/ '57 Johnson 35hp
1955 Alumacraft FD on a Gator trailer
1956 Alumacraft FD
The following user(s) said Thank You: cballer

Please Log in or Create an account to join the conversation.

1957 Ranger IV, Evinrude 30hp Lark 28 Sep 2021 15:17 #114887

  • cballer
  • cballer's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • 1957 Ranger IV, 1956 Evinrude 30hp Lark
  • Posts: 501
  • Thank you received: 101
Oldlure 

I found impeller that was obsolete on ME site
18-3006 Sierra , I’m thinking I’ll not buy kit unless I absolutely have to fingers crossed impeller housing is in fair shape! It was just on my maintenance list to check.
thx again 
curtis
1957 Ranger IV
Love the Feathercraft!!

Please Log in or Create an account to join the conversation.

1957 Ranger IV, Evinrude 30hp Lark 28 Sep 2021 14:59 #114886

  • cballer
  • cballer's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • 1957 Ranger IV, 1956 Evinrude 30hp Lark
  • Posts: 501
  • Thank you received: 101
RickG

ill email you today to sort out what I’m after and no problem just let me know when you get back in shop. Thx for eBay link those are great!

curtis
1957 Ranger IV
Love the Feathercraft!!

Please Log in or Create an account to join the conversation.

1957 Ranger IV, Evinrude 30hp Lark 28 Sep 2021 14:57 #114885

  • cballer
  • cballer's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • 1957 Ranger IV, 1956 Evinrude 30hp Lark
  • Posts: 501
  • Thank you received: 101
Oldlure 

thx for that! Impeller kit not available and ouch on water pump kit lol
wonder there must be aftermarket available for both obsolete impeller and pump kit?
It’s literally the last thing on my motor check list before diving into this vintage beauty. Lots of waiting after researching to get.

anyways appreciate the direction it anyone knows where to find these kits I’m all ears. Oldlure thx once again!! Sometimes the part number is the hardest thing to find wish they shipped to Canada lol (broken record I know)

thx in advance 
curtis
1957 Ranger IV
Love the Feathercraft!!

Please Log in or Create an account to join the conversation.

1957 Ranger IV, Evinrude 30hp Lark 28 Sep 2021 13:10 #114880

Next question 

This ones for the Evinrude 56’ lark.

been looking for kit # for water pump, impeller, gasket service.

I have individual number for everything but wondering it there was a part number for everything in one?
 
I’ve almost received everything on my tune up list for motor:)

thx
curtis

Here is a link 
www.marineengine.com/parts/brp/johnson-e...-water-pump-kit.html
 

Mike
1950 Skipper on Holsclaw Boat Roadster trailer
1954 Skipper w/ ’54 Johnson 10hp
1954 Deluxe Runabout w/ ’54 Johnson 25hp
1954 Vagabond w/ '57 Johnson 35hp
1955 Alumacraft FD on a Gator trailer
1956 Alumacraft FD
The following user(s) said Thank You: cballer

Please Log in or Create an account to join the conversation.

1957 Ranger IV, Evinrude 30hp Lark 28 Sep 2021 12:31 #114879

  • RickG
  • RickG's Avatar
  • Offline
  • Ship's Doctor
  • Ship's Doctor
  • Posts: 2717
  • Thank you received: 1234
I'll try to consolidate the answers...

Image #1: Yes, I can make that style. Some of the ones pictured in my post are not exact copies, size-wise, of the originals; a few are. I recently had to do a more precise copy of the US version of that one and I can modify the artwork for Fleet. I'd need you to confirm the size for me though as I'm not sure the Canadian boats use the exact same size. 

Image #3: This isn't one of mine. It was made by Jabe with a vinyl decal by Trey (...forum handle rushwal).  His method is a bit different than mine but either is a thing that you could do yourself if you were inclined. I'm happy to discuss this offline if you'd like. I do take custom orders for stuff like this, just not right now.

Image #10: You won't find these in the hardware store. They come from a company that supplies them to the aerospace industry.  The good news is that they also sell them to regular people on Ebay here: 

Classic U-shaped Toggle Switch Guards

Image #2: Yes, I can do that in the Fleet style.  The Fleet ones may have been red but any color is possible. The 'etching' post linked in my signature has prices and my email address. Feel free to reach out and let me know what you need.
"If you sow kindness, you reap kindness. If you sow jackassibility, you get jackassibility.” - Eli Drinkwitz

'54 Vagabond
'59 Crestliner Jetstreak
Etched panels and parts

The following user(s) said Thank You: cballer

Please Log in or Create an account to join the conversation.

Last edit: by RickG.

1957 Ranger IV, Evinrude 30hp Lark 28 Sep 2021 00:23 #114873

  • cballer
  • cballer's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • 1957 Ranger IV, 1956 Evinrude 30hp Lark
  • Posts: 501
  • Thank you received: 101
Next question 

This ones for the Evinrude 56’ lark.

been looking for kit # for water pump, impeller, gasket service.

I have individual number for everything but wondering it there was a part number for everything in one?
 
I’ve almost received everything on my tune up list for motor:)

thx
curtis
1957 Ranger IV
Love the Feathercraft!!

Please Log in or Create an account to join the conversation.

1957 Ranger IV, Evinrude 30hp Lark 27 Sep 2021 23:52 #114872

  • cballer
  • cballer's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • 1957 Ranger IV, 1956 Evinrude 30hp Lark
  • Posts: 501
  • Thank you received: 101
RickG

Thanks for update,

I think the most important to me would be the 2 badges on bow of boat I labeled #1.

The capacity tag I labeled #2 would be the one I’m interested in.( if it can be done for Canada )?

I do like the one I labeled #3 for my controller dash. I’m not sure if this is generic one you make or if you made this specific for someone? I have ideas on this one..

Curious about #10 picture I labeled, where on earth did u find those u-bolts? For some reason I can’t find at our fastener store.

as for timeline I’m not in a rush but would like to get 100%, maybe a price idea can be sent to PM, color options, customization options if any?

capacity tag all I can go off is the catalog pictures on our website here, unfortunately still no luck with s/n.

hope this helps get started.


Curtis 



 
1957 Ranger IV
Love the Feathercraft!!

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

1957 Ranger IV, Evinrude 30hp Lark 27 Sep 2021 20:16 #114867

  • RickG
  • RickG's Avatar
  • Offline
  • Ship's Doctor
  • Ship's Doctor
  • Posts: 2717
  • Thank you received: 1234
JBCurt hasn't been around in a while now. His tags were made with a sublimation printing process and looked very much like the originals. Mine are somewhat thicker, chemically etched and pain filled.  The post linked in my signature below has some examples. I have the artwork for the Fleet type.

I won't be able to make any of that stuff for a few weeks while my shop is being reworked though.
"If you sow kindness, you reap kindness. If you sow jackassibility, you get jackassibility.” - Eli Drinkwitz

'54 Vagabond
'59 Crestliner Jetstreak
Etched panels and parts

The following user(s) said Thank You: cballer

Please Log in or Create an account to join the conversation.

1957 Ranger IV, Evinrude 30hp Lark 27 Sep 2021 16:01 #114861

  • cballer
  • cballer's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • 1957 Ranger IV, 1956 Evinrude 30hp Lark
  • Posts: 501
  • Thank you received: 101
Question on capacity tags and fleet feathercraft decal.

first the capacity tag I see in threads that JBcurt00 use to do these. I’ve PM him but it looks like it’s been a while since he’s been logged in from what I can tell. Do you guys know if this is still something he does? Or another option?

Second one of you gents possibly oldlure sent me a pic of the Canadian feathercraft craft emblem which I saved. But wondering who might make this etched emblem (s)?

thx just doing what researching and ordering I can while I’m stuck at home sick and waiting on parts for ranger 

curtis
1957 Ranger IV
Love the Feathercraft!!

Please Log in or Create an account to join the conversation.

Time to create page: 0.110 seconds

Forum Statistics

  • Total Users:2542
  • Latest Member:MRoyals
  • Total Posts:106k
  • Total Topics:7555
  • Total Sections:9
  • Total Categories:24
  • Today Open:1
  • Yesterday Open:0
  • Today Answer:7
  • Yesterday Answer:18

Top Posters

Top Posters Posts
jabe 5934
Locomotion 5579
VinTin 5573
sgower 4815
Eagle127 4759
Boatboy 4388
BigBadJon 4152
MercuryMarc 3536
unclbuz 3271
Carol 3023

Contact

How to get ahold of Us

www.feathercraft.net Command Central
52457 Robins Drive
New Baltimore, Michigan 48047

Support

Events

Event Coordinator
info@feathercraft.net

 

Log in

Register



property of:

Feather Craft Technologies - Copyright © 2016 www.feathercraft.net